Boomerang I-Comms Ltd

Boomcast Incident Hub

Incident Hub is an on-line messaging platform used to co-ordinate incident communications. The intuitive application ensures that the communications for any type of incident are prepared fully before the event to facilitate the streamlined automatic flow of critical information when an incident strikes.

Features

  • Real-time reporting
  • Automated information flow
  • Automated regular updates to stakeholders

Benefits

  • Templated workflows can be pre-designed to shorten reaction times
  • Broadcasts use most penetrative channels, ensuring communications getting through
  • Automated regular updates keep stakeholders informed

Pricing

£0.027 to £0.07 per transaction per minute

Service documents

G-Cloud 10

626766268615046

Boomerang I-Comms Ltd

Peter Tanner

+44 207 224 5555

peter.tanner@boomcomms.com

Service scope

Service scope
Software add-on or extension Yes, but can also be used as a standalone service
What software services is the service an extension to Boomcast
Cloud deployment model Public cloud
Service constraints No constraints
System requirements Nil

User support

User support
Email or online ticketing support Email or online ticketing
Support response times Within 1 hour
User can manage status and priority of support tickets Yes
Online ticketing support accessibility None or don’t know
Phone support Yes
Phone support availability 24 hours, 7 days a week
Web chat support No
Onsite support Onsite support
Support levels An interactive on-line help facility exists in support of all Boomerang products. Additionally:
1st line will be delivered to Account Managers as and when required. It is understood that these account managers will be responsible for delivering the training and support to their end users. 2nd line support for P1 incidents will be delivered by Boomerang on call 24/7.
Support available to third parties No

Onboarding and offboarding

Onboarding and offboarding
Getting started On-boarding documentation is completed to ensure that services are provisioned according to a customer's requirements and when accessing the Service Set-up wizards are used to guide a customer through the implementation steps and aim to provide a baseline overview of the system functionality. The user interface also provides user documentation an in-application help library supported FAQs and troubleshooting.. Where required, we provide on-site training, user guide documents and telephone support where required. The in-built help facility is comprehensive and adaptive.
Service documentation Yes
Documentation formats PDF
End-of-contract data extraction Data can be extracted at any time into Excel or CSV format. For data extraction requests requiring manual intervention, all transactional consumer data will be removed from all systems; including computers, storage devices and other storage media once provided to the customer. After a service has been decommissioned, a request to access data must be submitted in writing, specifying the data required and the timeframe over which it is required. A limit on the time period over which data extraction requests can be fulfilled (e.g. previous 6 months) may apply Requests for data would usually be completed within 48 hours working at no cost to the customer Upon completion of data extraction and after this has been provided to the customer, all transactional consumer data will be removed from all systems; including computers, storage devices and other storage media.
End-of-contract process We have a controlled exit process in line with Information Security Management System that manages the extraction or removal of data securely. All service cancellation requests must be submitted in writing and are subject to the cancellation period stated in the contract (standard 30 days). Where any additional services have been contracted to (dedicated or shared inbound short code services for example) the terms of these agreements will remain in place. The service will remain active up to the agreed cancellation date and upon reaching the cancellation date, will be fully decommissioned and all subsequent requests to the service will be blocked. The customer will be obliged to pay any outstanding monies for subscriptions or message transactions that have not already been invoiced. Personal information can be removed by the customers directly in line with our off boarding processes. We can do this on behalf of the customer for non-standard requests (such as transactional message data) for which there may be a small cost. Please note that during the on-boarding process, customers can specify elements of personal data that are to be automatically deleted on completion of a message transaction (mobile numbers or message content).

Using the service

Using the service
Web browser interface Yes
Supported browsers
  • Internet Explorer 7
  • Internet Explorer 8
  • Internet Explorer 9
  • Internet Explorer 10
  • Internet Explorer 11
  • Microsoft Edge
  • Firefox
  • Chrome
  • Safari 9+
  • Opera
Application to install No
Designed for use on mobile devices Yes
Differences between the mobile and desktop service No difference
Accessibility standards WCAG 2.0 AAA
Accessibility testing No testing as the system dose not require any special keystrokes nor hardware
API No
Customisation available Yes
Description of customisation The dashboard can be arranged to suit the user. Logos and bespoke headers and footers can be added by administrators.

Scaling

Scaling
Independence of resources The nature of the service and the speed of processing are such that our systems have headroom for far more traffic than system users could possibly be able to generate. The hardware supporting the Services is provisioned with resources that are managed by VMware and resources can be spread across the Cloud as and where required. The baseline resources provide substantial headroom to accommodate dramatic spikes in messaging activity. System utilisation is monitored and notifications are triggered based on pre-defined thresholds being reached. These thresholds are set to ensure that additional resources can be applied before the service is impacted.

Analytics

Analytics
Service usage metrics Yes
Metrics types Management dashboards are standard. Reports can also be emailed to specific addresses.
Reporting types
  • Real-time dashboards
  • Regular reports
  • Reports on request

Resellers

Resellers
Supplier type Not a reseller

Staff security

Staff security
Staff security clearance Other security clearance
Government security clearance Up to Developed Vetting (DV)

Asset protection

Asset protection
Knowledge of data storage and processing locations Yes
Data storage and processing locations United Kingdom
User control over data storage and processing locations Yes
Datacentre security standards Complies with a recognised standard (for example CSA CCM version 3.0)
Penetration testing frequency At least every 6 months
Penetration testing approach In-house
Protecting data at rest Physical access control, complying with CSA CCM v3.0
Data sanitisation process Yes
Data sanitisation type Explicit overwriting of storage before reallocation
Equipment disposal approach Complying with a recognised standard, for example CSA CCM v.30, CAS (Sanitisation) or ISO/IEC 27001

Data importing and exporting

Data importing and exporting
Data export approach Data can be exported in csv format.
Data export formats CSV
Data import formats
  • CSV
  • Other
Other data import formats Excel

Data-in-transit protection

Data-in-transit protection
Data protection between buyer and supplier networks
  • TLS (version 1.2 or above)
  • IPsec or TLS VPN gateway
Data protection within supplier network
  • TLS (version 1.2 or above)
  • IPsec or TLS VPN gateway

Availability and resilience

Availability and resilience
Guaranteed availability 99.5% availability
Approach to resilience The platform has been designed and built to achieve 5x9 service availability. VMware provides full hardware fault tolerance along with multi-site failover in the event of a Data Centre outage or network issue. Failover between data centres can be achieved within minutes to help minimize the impact of a site isolate disaster. In the event of an issue at the application level, we are able to roll back cluster instances in real time via SNAP shot that are maintained via our SAN architecture. Node failure does not impact the production platform as VMware fences the node and ejects this from the running cluster without service impact. Version 5 is currently used with ‘DRS Configuration’ post failover, along with the VMware Fault Tolerance module All Services are replicated between sites, both memory and disk blocks are replicated in real time via VMware & SAN to SAN Replication. As such, when implementing a site failover, both memory and data is captured and replicated, thus removing any transition loss.
Outage reporting Outages are very unlikely to occur as the system has built in resilience from its fail-over composition, but in the exceptionally unlikely event of an outage, cliets are alerted by dashboard or direct email.

Identity and authentication

Identity and authentication
User authentication needed Yes
User authentication
  • 2-factor authentication
  • Username or password
Access restrictions in management interfaces and support channels Hierarchical layered permissions allow access to be restricted or opened as required.
Access restriction testing frequency At least every 6 months
Management access authentication
  • 2-factor authentication
  • Username or password

Audit information for users

Audit information for users
Access to user activity audit information Users receive audit information on a regular basis
How long user audit data is stored for User-defined
Access to supplier activity audit information Users receive audit information on a regular basis
How long supplier audit data is stored for At least 12 months
How long system logs are stored for At least 12 months

Standards and certifications

Standards and certifications
ISO/IEC 27001 certification No
ISO 28000:2007 certification No
CSA STAR certification No
PCI certification No
Other security certifications No

Security governance

Security governance
Named board-level person responsible for service security Yes
Security governance certified No
Security governance approach The organisation currently complies with a range of the requirements, policies and controls that maps to ISO 27001:2013. Our practices will also ensure compliance with the information security and privacy elements expressed in the EU General Data Protection Regulations. The following ISO 27001: 2013 focused tools, policies and frameworks are either in place or in the process of being implemented - An information security management system (ISMS) consisting of detailed policy controls in line with ISO27002 - Regular management reviews - Risk management methodology - Regular staff training - Performance evaluation and audits with corrective actions
Information security policies and processes Our policies and controls in line with ISO 27002 to address risks and requirements in the areas of: o Asset management o Access control o Cryptography o Physical and environmental security o Operations security o Communications security o System acquisition, development and maintenance o Supplier selection and management in life, including a robust segmented approach to supplier work based on the information assets the suppliers have access to in line with the risk assessment o Information security incident management (including readiness for EU GDPR) o Information security for business continuity planning and disaster recovery o Other compliance in line with applicable legislation, privacy and protection of personally identifiable information Performance evaluation takes place at regular intervals including reviews of policies, management reviews, audits as well as processes. An Improvement Track is used to manage instances of non-conformance and corrective actions. Additional capability already invested in includes processes and tools for managing specific aspects of EU GDPR such as subject access requests (SAR). In addition, the organisation has invested in capability for undertaking privacy impact assessments (PIA) and working in line with both EU GDPR and ISO 27001:2013 for information security in projects.

Operational security

Operational security
Configuration and change management standard Conforms to a recognised standard, for example CSA CCM v3.0 or SSAE-16 / ISAE 3402
Configuration and change management approach All service assets are recorded, tracked and updated via an inventory. Assets have a designated owner who is responsible for ensuring that assets are classified correctly, up to date and reviewed periodically, to safeguard access and accurate security classification. The asset owner is also responsible for ensuring that assets are securely returned disposed of or de-commissioned. Changes to any assets are recorded. A formal approval process is used for change requests (including risk assessment) and requisite testing is carried out across separate environments (Development, UAT) before release to production. A controlled process is also in place for emergency changes.
Vulnerability management type Conforms to a recognised standard, for example CSA CCM v3.0 or SSAE-16 / ISAE 3402
Vulnerability management approach External tools are used regularly to check for vulnerabilities across the estate; primarily Vulnerability Management scans and web application scans to verify that the application code is secure to DDS standards. Vulnerabilities are also identified and notified at a cloud and server management level (VMware, Plesk and CPanel). Patches are applied automatically to address specific vulnerabilities. It is also responsibility of the TISO to keep up to date with the latest information regarding technical vulnerabilities.
Protective monitoring type Supplier-defined controls
Protective monitoring approach Intrusion detection and intrusion prevention software is used to monitor network traffic to identify any potential compromise (surges in traffic from single sources, irregular traffic etc). Potential compromises are dealt with by isolating the affected environment and inspecting logs to assess the threat. Affected stakeholders are notified and root cause analysis carried out and mitigation plan developed. Real time monitoring takes place with immediate response for suspicious alerts. Abnormal patterns that may not trigger alerts are identified using dashboards or similar reporting tools. Common threats such as brute force attempts, automated FW reconfiguration is in place blocking traffic.
Incident management type Conforms to a recognised standard, for example, CSA CCM v3.0 or ISO/IEC 27035:2011 or SSAE-16 / ISAE 3402
Incident management approach Customers, staff and other stakeholders can report incidents through standard channels such as email and telephone. All incidents are recorded, assigned priority level and tracked through to completion, with the lessons learned feeding into other processes such as problem management. A dedicated process is followed for P1 Incidents to ensure stakeholders are pro-actively notified of the event and of the root cause. Our processes are ready for EU GDPR as well to ensure we can report and manage in those formats. We have reporting around incidents, events and weaknesses as well as links into the broader ISMS into the BCP.

Secure development

Secure development
Approach to secure software development best practice Conforms to a recognised standard, but self-assessed

Public sector networks

Public sector networks
Connection to public sector networks No

Pricing

Pricing
Price £0.027 to £0.07 per transaction per minute
Discount for educational organisations Yes
Free trial available Yes
Description of free trial The full scope of the product range is available as a free trial, on request.
Link to free trial https://boomerangmessaging.com/trial

Documents

Documents
Pricing document View uploaded document
Service definition document View uploaded document
Terms and conditions document View uploaded document
Return to top ↑